Category Archives: Luxury Replica Watches

One Cheap Rolex Fakes That Deserves Much More Love – The Cellini Moonphase

Enter the Cellini Moonphase, the least Cellini-esque Cellini ever. Introduced last year, the Cellini Moonphase was the first Cheap Rolex Fakes with a moon phase since the 1950s. That should have been a big deal.

Rolex has banished the italicised “Cellini” on the dial, making the Moonphase the only Cellini that isn’t labelled as such. Name calling aside, the Cellini Moonphase is actually a strikingly well executed watch. In fact, it is practically an Oyster in all but name.The 39mm case is well proportioned, verging on being thick but not quite. It is also typical Best Replica Watches in form – a tonneau shape with a round bezel, built with outstanding rigidity and robustness. Its origins are also evident in the profile, with the lugs tapering downwards to a pointed tip. The case is also water-resistant to 50m, not quite Oyster territory but close enough.

Even the recessed pusher for the moon phase is robustly constructed, surrounded by a raised lip, presumably to prevent the stylus from sliding when setting the moon phase.Like nearly all current Swiss Quality Rolex Watches cases, it is entirely mirror finished, unlike the earlier generations of cases that had contrasting brushed and mirrored surfaces. While the uniform surface is easier to refinish during servicing, it isn’t quite as refined as a varied finish.

But the best part of the watch is the dial. To start with it is well proportioned, with the chapter rings and moon phase properly placed, without any clumsy overlapping. That’s not just good design, but it also means the movement was designed to fit the case and dial.The surface is a glossy white lacquer, with exceptionally crisp printing, right down to the serifs of the numerals. Like all other Cellini Copy Watches, the minute track intersects the baton hour markers. At first glance it feels unconventional, but it settles in well. And it also makes sense, since it puts a border between the date and minute tracks.

The baton hour markers are notable for being split lengthwise, yet they line up perfectly. The narrowness of the markers, which are 18k pink gold, means they are adhered to the dial rather than attached with pins, and the perfect alignment would imply they are applied mechanically, rather than by hand. The result is fine, yet precise.The Replica Watches dial design feels radial, a sensation enhanced by the four hands in the centre. All the hands are 18k pink gold, save for the blued steel pointer for the date.

Naturally the highlight is the moon phase at six, smartly done in a combination of materials. The blue disc is fired enamel, evidenced by the slight unevenness of the surface visible under magnification, while the stars are printed in a granular metallic lacquer. The enamel disc is an unusual but pleasing old-fashioned choice of material, given Best Replica Watches inclination towards technology.

The miniature moon jumps out, being strikingly silver thanks to the rhodium plating. It’s made of meteorite that’s been cut and then etched with acid to bring out the streaky Widmanstätten pattern of the iron crystals that make up the material.

Best Replica Watches Debuts In-House

Following the introduction of the impressive Monsieur de Chanel Calibre 1 in 2016 and the Première Camelia Skeleton Calibre 2 last year, Chanel Best Replica Watches recently unveiled its third in-house movement. Making its debut in the oblong Boy.Friend watch, the Calibre 3 is a skeletonised, hand-wound movement.

Featuring a distinctive, vertically linear construction, the Calibre 3’s clean, circular lines are a pleasing complement to the rectangular Art Deco case that’s inspired by the bottle cap of Chanel’s no. 5 perfume.

Launched in 2015, the Boy.Friend Replica Watches was a riff on the octagonal design of Chanel’s better known Première lady’s watch. The Boy.Friend is a watch for ladies, but conceived as a being slightly more masculine; a watch a lady might borrow from her boyfriend, hence the name. Prior to this, the Boy.Friend watches were powered by either an ETA 7001 or a quartz movement.

Developed by Chanel subsidiary G&F Châtelain in La Chaux-de-Fonds, along with help from independent watchmaker Romain Gauthier, the Swiss Quality Replica Watches Calibre 3 is neatly framed by three overlapping circles. Thoughtfully and impeccably designed, the movement is laid out vertically, with the barrel at 12 o’clock, the regulator at five o’clock, and the wheel train in between.

The ADLC coated bridges are edged with a beige-gold galvanic coating, ensuring an aesthetic unity between the beige-gold case and movement. There’s even Chanel’s Copy Watches signature lion motif, attached to the third circular bridge on the back.

The movement beats at 4Hz, and is equipped with a variable inertia balance wheel and offers a 55-hour power reserve. The beige-gold case measures 37mm by 28.6mm and features a crown with an onyx cabochon. It’s also available in a gem-set version with 66 brilliant-cut diamonds on the bezel.